It was the first week of Year 2 Project.
The group members firstly had a meeting with Academic Adviser on Thursday,
re-clarify the project target, to build a mobile controlled DC motor; then, made a clear plan which include what would
be done in each week.
On Friday, we first check whether all needed components were sent to the laboratory, unfortunately, the DC motor we needed was not arrive, which means we could not build the whole circuit. Instead of wasting time on waiting for the motor, we checked the rest of components, for instance, the arduino UNO that is one of the most significant components (shown in Figure 1), runs well.
On Friday, we first check whether all needed components were sent to the laboratory, unfortunately, the DC motor we needed was not arrive, which means we could not build the whole circuit. Instead of wasting time on waiting for the motor, we checked the rest of components, for instance, the arduino UNO that is one of the most significant components (shown in Figure 1), runs well.
Figure 1
We double-checked the circuit we created to make sure it
were not have any mistakes, and when we begin to build the circuit, it will not
waste our time. 
No comments:
Post a Comment